The Walrus Audio Slö Multi Texture Reverb Pedal allows you to create lush, modulated, sleepy and ambient soundscapes with long washy trails.

Stocked with three different algorithms specifically designed to invoke dream like textures, a single toggle switch allows you to choose three different reverb modes, Dark (lower octave), Rise (ambient swell) and Dream (latching pad), while secondary functions of the switch change between different wave shapes for the modulation on the reverb trail.

The three different algorithms (left) and three different wave shapes (right) ensure you're stocked with tons of tweakable effects. Holding down the bypass while switching the algorithm toggle enables your selection and keeps the buttons and switches low in number.

• DARK adds a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a sub-octave signal that feeds the reverb
• RISE is his is an auto-swell reverb for beautiful cinematic swells. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times
• DREAM gives a lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and pad will decrescendo according to where decay knob is set. X knob sets the depth of vibrato applied to the reverb trail
• SINE is a smooth and even pitch up and down modulation
• WARP symmetric pitch up modulation like a warped record
• SINK generates asymmetric pitch down modulation for sinking detune like a Bigsby

Also featuring momentary functions. When the switch is in off position, press and hold bypass to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off and fades it out. When sustain is pressed, the decay switch ramps up the reverb trail to maximum creating long dreamy reverb trail and then ramps back down to the decay knob setting when released. In the dream algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.

The pedal can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for one second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

With a stable diecast enclosure and original artwork by Christi Du Toit, the Walrus Audio Slö gives you dreamy multi texture reverb sounds, enabling you to generate and create unique soundscapes.

This product hasn’t received enough customer reviews to display a summary.